MovieBox Pro for Android TV & Google TV — Install Free on Any TV Box [2026]
Last Updated: May 2026 | Compatible With: Android TV, Google TV, Nvidia Shield, Chromecast, Sony, TCL, Mi Box | Method: APK Sideload
Android TV and Google TV are among the best platforms for running MovieBox Pro. Because both run on a version of Android under the hood, the same APK file used on Android phones installs directly — no emulator, no workaround hardware, and no special TV-specific build needed. One file, the same app, on your big screen.
The difference between this guide and the phone install process comes down to two things: how you get the APK onto the TV device, and how you navigate the app once it is installed. A TV remote is not a touchscreen, so the approach changes slightly. This guide covers both.
Android TV and Google TV are not the same thing — and the setup path differs between them. This is the most common source of confusion when people follow the wrong instructions and get stuck. The distinction is explained in the first section. If you already know which one you have, jump to the relevant installation section.
You can also install moviebox pro app on amazon firestick tv and android phones via step by step process.
Android TV vs Google TV — What Is the Difference and Why Does It Matter?
Both Android TV and Google TV are developed by Google and run on the Android operating system. The key difference is the interface layer sitting on top:
Android TV uses a traditional app-grid home screen. You see your installed apps in rows and navigate between them directly. This is found on older Sony Bravia TVs, Philips Android TVs, Nvidia Shield TV, Mi Box S, TCL older models, and most third-party Android TV boxes.
Google TV is a newer interface layer that sits on top of Android TV. Instead of showing you apps, the home screen shows you personalised content recommendations drawn from across your installed apps. Google TV is found on newer Chromecast devices (Chromecast with Google TV 4K), newer Sony Bravia XR TVs, newer TCL models, and some Hisense TVs.
Why this matters for MovieBox Pro installation: The Developer Options path — the setting that allows sideloading of APKs — is located in different places on Android TV versus Google TV. Using the wrong path gets you nowhere. This guide has separate step-by-step sections for each.
What You Need Before Starting
- An Android TV or Google TV device with internet access
- A Wi-Fi connection (or Ethernet for TV boxes)
- The Downloader app installed from the Google Play Store on your TV
- About 10 minutes
No computer, no phone, no USB drive needed. Everything is done directly on the TV using the remote.
Method 1 — Android TV (Sony Bravia, Mi Box, Nvidia Shield, TCL, TV Boxes)
Phase 1 — Enable Unknown Sources on Android TV
Step 1 — Open Settings From the Android TV home screen, scroll to the Settings icon (gear icon). On most Android TV devices this is in the top right corner of the home screen. Press the select button on your remote.
Step 2 — Go to Device Preferences Inside Settings, scroll down and select Device Preferences (on some older Android TV builds this may appear as Security & Restrictions directly).
Step 3 — Open Security & Restrictions Select Security & Restrictions. You will see an option called Unknown Sources or Install Unknown Apps here.
Step 4 — Enable Unknown Sources for Downloader Toggle Unknown Sources to ON, or find the Downloader app in the list and toggle Allow to ON specifically for it. Some Android TV versions use a global toggle; others use per-app permissions like the phone version of Android 8+.
Phase 2 — Install the Downloader App
Step 5 — Open the Google Play Store From the Android TV home screen, navigate to the Play Store icon and open it.
Step 6 — Search for Downloader Use the on-screen keyboard or voice search (press the microphone button on your remote) to search for Downloader. It is the orange icon made by AFTVnews.
Step 7 — Install Downloader Select the Downloader app and press Install. It is free and installs in about 30 seconds.
Phase 3 — Download and Install MovieBox Pro APK
Step 8 — Open Downloader Navigate to the Downloader app on your home screen and open it. Grant file access permissions if prompted.
Step 9 — Enter the MovieBox Pro Download URL In the Downloader URL field, enter:
movieboxpro.net/downloadPress Go. The page loads and the APK download begins automatically, or a download button appears — press it with your remote.
Step 10 — Install the APK When the download completes (~48 MB), Downloader automatically prompts you to install. Press Install using your remote. The installation takes about 15 seconds.
Step 11 — Delete the APK File After installation, press Delete to remove the APK file from your storage — you no longer need it and it frees space on the device. Then press Done.
Step 12 — Open MovieBox Pro Find the MovieBox Pro icon on your Android TV home screen. If it does not appear immediately, go to your app drawer and look for it there. Press the select button to open it.
Method 2 — Google TV (Chromecast with Google TV, Newer Sony, Newer TCL)
Google TV requires an extra step before Unknown Sources can be enabled. You must first unlock Developer Options, which is hidden by default.
Phase 1 — Unlock Developer Options on Google TV
Step 1 — Open Settings From the Google TV home screen, navigate to the profile icon in the top right corner, then select Settings (the gear icon).
Step 2 — Go to System Inside Settings, scroll down and select System.
Step 3 — Find “About” Select About at the bottom of the System menu.
Step 4 — Enable Developer Mode Find the entry that says Android TV OS Build (or simply Build). Using your remote’s select button, click on this entry 7 times in rapid succession. A counter appears on screen telling you how many more clicks are needed. After the 7th click, a message confirms: “You are now a developer.”
Step 5 — Access Developer Options Press the back button. You will now see Developer Options listed inside the System menu — it was hidden before. Select it.
Step 6 — Enable USB Debugging and Unknown Sources Inside Developer Options, enable USB Debugging. Then find Install Unknown Apps or Unknown Sources and enable it for the Downloader app.
Phase 2 — Install Downloader on Google TV
Step 7 — Open the App Store Navigate to the Google Play Store on your Google TV device. Search for Downloader and install it (the orange AFTVnews icon). Free, installs in under a minute.
Phase 3 — Download and Install MovieBox Pro on Google TV
Step 8 — Open Downloader and Enter the URL Open Downloader, navigate to the URL bar, and type:
movieboxpro.net/downloadPress Go and allow the APK to download.
Step 9 — Install When prompted, press Install. After installation, press Delete to clear the APK file, then Done.
Step 10 — Launch MovieBox Pro On Google TV, sideloaded apps do not appear on the main home screen by default. To find MovieBox Pro:
- Say “Open MovieBox Pro” to your Google TV remote’s voice button
- Or go to Apps → See All Apps and find it in the full list
- Or go to Settings → Apps → See All Apps
To pin it to your home screen: highlight the MovieBox Pro icon in the app list, press and hold the select button, and choose Add to Favourites or Move to Home Screen depending on your Google TV version.
Device-Specific Notes — Your TV Box or Brand
Nvidia Shield TV and Shield TV Pro
Nvidia Shield is widely considered the best Android TV box available and handles MovieBox Pro exceptionally well. The Shield runs a stock-close version of Android TV with consistent performance and excellent 4K HDR output.
The Unknown Sources path on Shield is: Settings → Device Preferences → Security & Restrictions → Unknown Sources → toggle ON globally (Shield uses the global toggle, not per-app).
Shield’s hardware advantage for MovieBox Pro: the Tegra X1+ chip handles 4K HDR decode in hardware, meaning 4K streams from MovieBox Pro play without frame drops even on maximum quality settings. On lower-end TV boxes, 4K streams sometimes stutter due to software decoding overhead — not an issue on Shield.
Xiaomi Mi Box S and Mi Box 4K
Mi Box S runs standard Android TV and follows the Method 1 steps above exactly. One Mi Box-specific note: the Settings path is Settings → More Settings → Security & Restrictions → Unknown Sources.
Mi Box handles HD and 1080p streaming without issue. For 4K streams, performance is adequate but occasional frame drops can occur depending on stream source quality. Setting the stream quality to 1080p inside MovieBox Pro resolves this if 4K stutters.
Sony Bravia Android TV and Google TV
Sony Bravia TVs use either Android TV (older models, typically pre-2022) or Google TV (newer Bravia XR models from 2022 onwards). Check your TV’s home screen — if it shows app rows, you have Android TV. If it shows content recommendations, you have Google TV.
For Android TV Sony models, follow Method 1. For Google TV Sony models (XR series), follow Method 2.
One Sony-specific note: Sony’s security settings occasionally reset after a system update. If MovieBox Pro stops opening after a Sony TV firmware update, revisit Security & Restrictions and confirm Unknown Sources is still enabled.
TCL Android TV and Google TV
TCL makes both Android TV and Google TV models. Older TCL TVs use Android TV (Method 1). Newer TCL 6-Series and higher from 2023 onwards typically run Google TV (Method 2). Check your settings menu — if you see a Developer Options menu under System, you are on Google TV.
Chromecast with Google TV (4K and HD)
Chromecast with Google TV requires the Developer Mode activation in Method 2. One Chromecast-specific note: the on-screen keyboard on Chromecast is slow and navigating URLs can be tedious. If you have a phone on the same network, you can use the Google TV app to type the URL remotely — it functions as a remote keyboard that syncs with your Chromecast.
Generic Android TV Boxes (X96, H96, TX3, etc.)
Budget Android TV boxes from manufacturers like X96, H96, and TX3 run generic versions of Android TV. These work with MovieBox Pro but with caveats: the build quality of the Android OS on budget boxes varies, Unknown Sources is sometimes enabled by default, and the hardware (typically 2 GB RAM and Amlogic processors) handles 1080p streaming well but may struggle with 4K. Set MovieBox Pro stream quality to 1080p or 720p for the most stable playback on budget hardware.
Navigating MovieBox Pro With a TV Remote
MovieBox Pro was originally built as a touchscreen app. On a phone you tap — on a TV remote you use directional buttons. Here is how the remote maps to the interface:
| Remote Button | MovieBox Pro Action |
|---|---|
| Directional pad (up/down/left/right) | Navigate between content cards |
| Select / OK button | Tap / open selected item |
| Back button | Go back one screen |
| Home button | Return to TV home screen (MovieBox runs in background) |
| Voice button | Trigger Google Assistant (not MovieBox search) |
For search: Navigate to the search icon inside MovieBox Pro using the directional pad, press select, and use the on-screen keyboard to type. On devices with a voice-enabled remote, you can also use the MovieBox Pro voice search icon if available.
Playback controls:
| Remote Button | Playback Action |
|---|---|
| Select / OK | Play / Pause |
| Left / Right | Skip backward / forward 10 seconds |
| Up | Show playback controls overlay |
| Back | Exit player |
| Menu / three-line button | Open stream source selector |
On Nvidia Shield, the dedicated fast-forward and rewind buttons on the Shield remote work natively inside MovieBox Pro’s player.
Features Available on Android TV and Google TV
Everything in the main MovieBox Pro app is available on the TV version — the same APK file runs on both phones and TV boxes. Notable features that specifically benefit from the big screen:
4K and 8K Streaming on Compatible Hardware
On Android TV boxes with 4K HDR support (Nvidia Shield, Chromecast with Google TV 4K, Mi Box 4K, Sony Bravia 4K), MovieBox Pro serves 4K stream sources where available. The TV’s display pipeline handles HDR tone mapping, delivering better 4K HDR quality than streaming the same content on a phone and casting it.
Chromecast Casting From Your Phone
If you already have MovieBox Pro installed on your Android phone — using the setup from the dedicated Android guide — you can cast directly from the phone to your Android TV or Google TV device using MovieBox Pro’s built-in cast icon. The phone acts as the remote and the TV handles playback. This means you do not necessarily need to install MovieBox Pro on the TV at all if casting from your phone is more convenient.
Offline Downloads to External Storage
Android TV boxes with USB ports support external storage (USB drives, external SSDs). MovieBox Pro’s offline download feature can save files to external storage on supported devices — useful on boxes with limited internal storage (16 GB is common on budget devices). Go to MovieBox Pro Settings → Download Location and switch to the external drive if one is connected.
Multi-Language Subtitles on Big Screen
Subtitles at TV scale are significantly more readable than on a phone. The font size, colour, and position adjustments available inside MovieBox Pro’s subtitle settings are worth using on a TV — increase font size by 20–30% compared to what you would use on a phone for comfortable viewing from a sofa distance.
Android TV vs Firestick for MovieBox Pro — Which Is Better?
A common question from users who have both options available:
| Factor | Android TV Box | Firestick |
|---|---|---|
| Install method | APK via Downloader (same as Firestick) | APK via Downloader |
| Mouse Toggle needed | ❌ Not usually needed | ✅ Required |
| Navigation | Native remote works well | Requires Mouse Toggle for full navigation |
| Performance | Varies by hardware (Shield is best) | Consistent across Fire TV models |
| 4K quality | Hardware dependent (Shield = best) | Firestick 4K Max = excellent |
| Storage | Often more internal storage | Limited (8 GB on most models) |
| Google services | ✅ Full Google Play, Assistant | ❌ Amazon ecosystem only |
| Cost | $30–$250 depending on device | $30–$55 for 4K Max |
The most important practical difference: Android TV does not require Mouse Toggle. MovieBox Pro’s remote navigation on Android TV works with the standard directional pad without any additional tools. The Firestick requires Mouse Toggle because Fire OS handles app navigation differently — a process covered in full in the Firestick installation guide.
If you are choosing between a Firestick and an Android TV box specifically for MovieBox Pro, the Android TV setup is simpler — one less tool to install and maintain.
How to Update MovieBox Pro on Android TV and Google TV
Like the phone version, MovieBox Pro on Android TV does not update automatically. To update:
- Open the Downloader app on your TV
- Enter movieboxpro.net/download in the URL field
- Download the new APK
- Install it over the existing version — no uninstall needed
- Your settings and watchlist are preserved
Bookmark this page so you always have the latest download link. Each update brings new content, performance fixes, and expanded device compatibility — staying on v3.3 gives you the most stable experience on current Android TV hardware.
Troubleshooting — Android TV and Google TV Specific Issues
MovieBox Pro icon not appearing on the home screen after install On Google TV, sideloaded apps do not appear on the main home row automatically. Go to Apps → See All Apps to find it. Long-press to add it to the home screen or favourites row.
“Install blocked by security policy” on Google TV You did not fully complete the Developer Options activation (7-click process on the Build number). Return to Settings → System → About → Android TV OS Build and click 7 times until the developer confirmation message appears. Then return to Developer Options and enable Unknown Sources.
App installed but streams fail to load on the TV This is nearly always an internet connection issue on the TV rather than an app problem. Test your TV’s connection by opening the Play Store or YouTube — if those load slowly, your TV’s Wi-Fi is the bottleneck. For TV boxes connected via Wi-Fi, moving closer to the router or switching to a 5 GHz band (if your router supports it) usually resolves this. Alternatively, an Ethernet connection directly from the router to the TV box eliminates Wi-Fi variability entirely and delivers the most stable streaming.
Playback stutters or drops frames at 4K Lower the stream quality inside MovieBox Pro to 1080p. Most budget Android TV boxes decode 4K in software rather than hardware, which causes frame drops under load. Nvidia Shield, Chromecast 4K, and Mi Box 4K handle hardware 4K decoding and generally play 4K streams without issues. On everything else, 1080p is the practical maximum for stutter-free playback.
Downloader cannot find the URL / “Connection failed” in Downloader Your Android TV box may have a DNS block on certain domains. Change your TV’s DNS to Google’s public DNS: go to Settings → Network → Advanced → DNS and enter 8.8.8.8. This resolves most download URL failures in Downloader on Android TV.
Unknown Sources keeps reverting after TV restarts This happens on some budget Android TV boxes where the firmware resets security settings on reboot. A permanent workaround: install File Commander or X-plore File Manager from the Play Store, transfer the MovieBox Pro APK to the TV via USB or local network share, and install from the file manager — this method sometimes bypasses the setting reset issue.
Sony Bravia TV lost Unknown Sources setting after firmware update Sony pushes firmware updates automatically. After each update, return to Settings → Device Preferences → Security & Restrictions and re-enable Unknown Sources. MovieBox Pro’s install is not affected by the update — only the permission setting resets, not the app itself.
For issues not specific to Android TV — such as buffering, no streams found, or login problems — the full troubleshooting guide covers every error type across all platforms.
Frequently Asked Questions
Does MovieBox Pro have a special Android TV version? No — the standard MovieBox Pro APK works on Android TV directly. There is no separate TV build. The same file that installs on an Android phone installs on any Android TV or Google TV device. The interface scales for the TV screen automatically.
Do I need Mouse Toggle on Android TV like on Firestick? Generally no. Android TV’s remote navigation works with MovieBox Pro’s directional controls without any additional tools. Mouse Toggle is specifically required on Firestick because of how Fire OS handles app input differently. This is one of the practical advantages of Android TV over Firestick for MovieBox Pro.
Does MovieBox Pro work on Nvidia Shield TV? Yes — and it runs better on Shield than on most other Android TV devices due to the Shield’s hardware decode capabilities for 4K HDR. Follow the Method 1 steps above. The Unknown Sources path on Shield is under Settings → Device Preferences → Security & Restrictions.
Does MovieBox Pro work on Chromecast with Google TV? Yes. Follow Method 2 in this guide — the Developer Mode activation (7 clicks on Build number) is required before Unknown Sources becomes accessible on Chromecast with Google TV. Once enabled, the Downloader process is the same as any other device.
Can I cast from my phone to Android TV instead of installing directly? Yes. If MovieBox Pro is already on your phone — installed using the process in the Android guide — you can cast the stream from your phone to any Chromecast-compatible Android TV or Google TV device using the cast icon inside MovieBox Pro’s player. The quality may be slightly lower than running the app natively on the TV device.
My Android TV box has only 16 GB storage — will MovieBox Pro fit? MovieBox Pro itself is ~48 MB, which is negligible. The concern with limited storage is offline downloads — each HD movie uses 1–3 GB. Connect a USB drive or external SSD and configure MovieBox Pro to download to external storage to avoid filling up the internal drive.
Does MovieBox Pro support voice search on Android TV? The Google Assistant voice button on Android TV remotes triggers Google Assistant, not MovieBox Pro’s internal search. To search within MovieBox Pro, navigate to the search icon inside the app using the directional pad and use the on-screen keyboard. On Nvidia Shield, the Shield remote’s voice button can be remapped, but this is a system-level setting unrelated to MovieBox Pro.
Do I need a VPN on Android TV for MovieBox Pro? For the same reasons as on Android phones — ISP throttling and IP exposure to stream servers. The VPN guide covers VPN options with Android TV app support. NordVPN and Surfshark both have Android TV apps available from the Google Play Store, making installation straightforward on any Android TV device.
Will MovieBox Pro affect my Android TV’s warranty? No. Sideloading apps using the official Developer Options settings is a standard Android feature. It does not modify your device’s firmware, does not root it, and does not void any manufacturer warranty. You are using a feature that Google and manufacturers intentionally built into the platform.
Summary
MovieBox Pro runs natively on Android TV and Google TV using the same APK that installs on any Android phone. The installation process is straightforward — Downloader app, URL entry, APK install — with the one critical difference being the Developer Options activation step required on Google TV devices before Unknown Sources becomes accessible.
The Android TV setup has one meaningful advantage over Firestick: no Mouse Toggle needed. The remote navigation works with MovieBox Pro out of the box, making the post-install experience cleaner than on Fire OS.
Whatever Android TV device you have — Shield, Chromecast, Mi Box, Sony Bravia, TCL, or a budget TV box — the method above gets MovieBox Pro running on your big screen in under ten minutes.